×

    Request A Free Quote

    *We respect your confidentiality, and all information is protected.







    Contact Us

    Different Types of Pills: What You Should Know

    Pick up any bottle of medicine, and you are holding the result of dozens of decisions made months or years before it reached the shelf. Is the drug inside a two-piece gelatin shell or a compressed white tablet? Does it have a colored coating, a sugar glaze, or no coating at all? None of these choices is arbitrary.

    The main types of pills are capsules and tablets. Hard gelatin capsules have two pieces and hold powder or pellets. Soft gelatin capsules, or softgels, are one-piece shells that hold liquids and oils. Tablets come in several forms: uncoated, film-coated, sugar-coated, effervescent, chewable, and sublingual. Each type solves a practical problem: protecting the active ingredient, controlling how fast it releases, or simply making the pill easier to take.

    What follows is a close look at each pill type, how they get made, what separates capsules from tablets in practice, and the inspection steps that keep production safe.

    What Are the Main Types of Pills?

    Pills break down into two broad families: capsules and tablets. Subtypes within each family address different drug properties, release requirements, and patient situations.

    Different Types of Pills

    Capsules

    A capsule is a shell that holds a dose of medicine. The shell dissolves after swallowing and releases its contents into the digestive tract. Most shells are made from gelatin, though plant-based alternatives like hydroxypropyl methylcellulose (HPMC) have grown popular.

    Hard gelatin capsules have two cylindrical parts: a longer body and a shorter cap. The manufacturer fills the body with powder, granules, or small pellets, then seals the cap on using a capsule filler. Sizes range from 000 (about 1.37 ml) down to 5 (about 0.13 ml). The two-piece design has stayed dominant because it is simple, reliable, and works with a wide range of fill materials.

    Soft gelatin capsules are single-piece sealed containers. The shell has plasticizers mixed in, so it stays flexible. These work well for drugs that are liquids or oils since the seamless shell will not leak. Fish oil, vitamin D, and some heart drugs ship as softgels for this reason.

    Vegetarian capsules made from HPMC or pullulan now hold a meaningful chunk of the market. They solve the animal-product issue and handle high-humidity storage better than gelatin capsules do.

    Tablets

    Tablets are made by compressing powder under tons of pressure. They are the most common oral dosage form because they are cheap, stable, and easy to handle in large volumes.

    Uncoated tablets are the simplest. Just powder, compressed. Some fall apart instantly in stomach fluid. Others have disintegrants added so they break down at a specific rate after swallowing.

    Film-coated tablets get a thin polymer layer sprayed on. The coating hides bitter tastes and adds color. It adds only 2-4% to the tablet’s weight, so the pill does not get much bigger.

    Sugar-coated tablets were the standard decades ago, and some products still use them. The sugar hides the taste completely and gives a smooth, glossy surface. The catch is that sugar coating takes hours and adds 30-50% to the tablet’s weight.

    Effervescent tablets fizz and dissolve in water. They contain citric acid and sodium bicarbonate. Drop one in a glass, wait a few seconds, and you have a drinkable solution. They work for patients who cannot or do not want to swallow solid pills.

    Chewable tablets get crushed by teeth before swallowing. Flavors and sweeteners make the experience bearable. Antacids and children’s vitamins often use this format.

    Sublingual tablets sit under the tongue. The drug is absorbed through the thin mucous membrane directly into the blood, skipping the stomach and liver. This process means faster onset.

    Other Oral Dosage Forms

    Lozenges dissolve slowly in the mouth. Orodispersible tablets fall apart on the tongue in seconds with no water needed. Enteric-coated pills have a coating that stands up to stomach acid but dissolves in the small intestine, useful for drugs that stomach acid would destroy or that would irritate the stomach. Pastilles and troches sit in a gray zone between candy and medicine, mostly for coughs and sore throats.

    How Capsules Are Manufactured

    Capsules

    Capsule manufacturing runs in three stages: fill the shells, polish them clean, and inspect the results.

    The shells come from specialized suppliers, pre-sorted and pre-locked.

    The Role of a Capsule Filler

    A capsule filler does four things: separates the cap from the body, fills the body with the drug powder, rejoins the two pieces, and pushes the finished capsule out.

    Semi-automatic machines let operators load shells by hand into trays. They run 5,000 to 25,000 capsules per hour and suit R&D or small batches. Fully automatic machines run 100,000 to 200,000 per hour. They use vacuum to separate caps from bodies, then a dosing system pushes powder in.

    The dosing system you pick changes the result. Auger fillers turn a screw to meter powder; they do well with free-flowing material. Dosator systems compress powder into a small plug first, which helps with fluffy or sticky formulations. Tamping pin systems press powder in bit by bit, giving tighter weight control for tricky blends.

    Capsule Polishing and Finishing

    Freshly filled capsules come out coated in powder dust. That dust makes them look unappealing, gums up printing and banding, and risks cross-contamination in packaging.

    A capsule polisher cleans them. Capsules move past rotating brushes or through a vibrating cloth-lined channel while a vacuum pulls the dust away. Some polishers also sort by size and kick out capsules that are too short, too long, or dented.

    Next comes inspection. A capsule inspection system uses cameras and software to catch problems at full speed: split caps, pinholes, color problems, and capsules that did not close properly.

    After inspection, capsules may get banded (a gelatin strip sealed at the joint), printed with identification, and counted into bottles or blister packs. A pill counter handles this last step at speeds far beyond what manual counting can achieve.

    How Tablets Are Manufactured

    tablets

    Tablet production is about compressing powder into shape, then often adding a coating.

    Tablet production has three stages: powder preparation, compression, and coating.

    Tablet Press Technology

    A tablet press forces powder between an upper and lower punch inside a steel die. The punches squeeze the material until it compacts into a solid tablet.

    Single-punch presses use one punch set and make 50 to 80 tablets per minute. This method is good for development work and low-volume products.

    Rotary presses hold dozens of punch-and-die sets on a spinning turret. Each die fills with powder from a feed frame, then runs between compression rollers. A modern rotary press can crank out more than 500,000 tablets per hour.

    The compression force sets the tablet’s hardness. If it’s too soft, it dissolves too quickly. If it’s too soft, it crumbles. Too hard and it passes through the body intact. Operators tune the force to the powder blend, and every blend behaves differently.

    Before compression, most powders go through granulation. Wet granulation mixes in a liquid binder, dries the result, and mills it to uniform particles. Dry granulation squeezes powder between rollers and then breaks the sheet into granules. Direct compression skips granulation and presses the blend straight but only works for formulations that flow and compress easily on their own.

    Tablet Coating Processes

    Tablet coating puts a thin layer on the tablet surface. The reasons: mask taste, block moisture and light, control where the drug releases, or give the product a recognizable look.

    A coating pan, basically a large rotating drum, tumbles the tablets while spray nozzles apply coating solution. Hot air blows through to dry each layer as it forms. The cycle repeats until the coating reaches the target thickness.

    Film coating is the standard now. The solution has a polymer, a plasticizer, and pigment. Each pass deposits a few microns. Final thickness runs 20 to 100 microns.

    Sugar coating takes much longer, sometimes 12 to 24 hours per batch. You build up thick layers of sucrose syrup, drying each before adding the next. The finished coat adds 30-50% to the tablet’s weight. Film coating has mostly replaced it for new products, but sugar coating hangs on where the glossy look is part of the product’s identity.

    Enteric coating uses polymers that survive low pH. The coating stays put in the stomach and dissolves once the pill hits the small intestine, where the pH is above 5.5. This protects acid-sensitive drugs, shields the stomach from irritating compounds like aspirin, and enables delayed-release designs.

    Capsules vs Tablets: Key Differences

    Capsules dissolve faster and mask taste more effectively. Tablets are cheaper to make, more stable on the shelf, and can be split for dose adjustment.

    The comparison is important from the earliest formulation work. Every drug is different, and the right format depends on the chemistry, the patient, and the economics.

    FactorCapsulesTablets
    Absorption speedThe gelatin shell dissolves in 2-5 minutesMust disintegrate first; takes 5-30 minutes
    Taste maskingShell blocks taste entirelyNeeds a coating
    Production costShells add material costJust powder and compression
    Shelf stabilitySensitive to humidityGenerally more stable
    Dose splittingCannot split a capsule reliablyScored tablets split easily
    Custom shapesLimited to capsule shapesAny shape is possible
    Liquid formulationsSoftgels onlyNot an option
    API protectionLess barrier against oxygen and moistureBetter when coated appropriately

    One practical difference that shows up in clinics: scored tablets let patients split doses. A doctor can prescribe half a tablet during a taper. Capsules cannot be split. Open one and the powder spills out.

    Capsules win on speed. The gelatin shell dissolves in two to five minutes in the stomach. Tablets have to disintegrate first. That can take anywhere from five to thirty minutes, depending on how hard they were pressed and what disintegrants the formula includes.

    On cost, tablets win clearly. A high-speed rotary press can make pills for well under a cent each in raw materials. Capsules add one to three cents per shell, plus the filling machine costs more upfront.

    Quality Control and Inspection

    pills

    Every pill goes through visual inspection, weight verification, and disintegration testing. Most also pass dissolution testing. Inspection systems catch surface flaws, weight drift, and foreign particles.

    Quality checks do not wait until the end of the line. In-process monitoring tracks compression force, fill weight, and coating thickness as production runs.

    Visual inspection is the last checkpoint. For capsules, crews or cameras look for dents, splits, incomplete closures, pinholes, and print smears. For tablets, they check for chips, cracks, capping (where the top layer peels off), sticking (material stuck to the punch face), and color that looks off.

    Hand inspection on a conveyor works for small batches, but it is slow and people get tired. Automated systems now run most pharmaceutical lines. High-speed cameras snap each pill from several angles, and software flags anything that does not match the reference image.

    A capsule inspection line can process 100,000 units per hour, checking dimensions, surface quality, and color consistency. Tablet inspection adds checkweighing: if a tablet weighs too little or too much, it gets rejected immediately.

    Beyond what the eye or camera can see, regulators require disintegration and dissolution testing. Disintegration measures how fast the pill breaks apart in simulated stomach fluid. Dissolution goes further and measures how much of the drug actually goes into solution over time, which is a stronger signal for how the body will absorb it. The USP sets dissolution criteria for every drug product, and each batch must pass before it ships.

    Metal detectors and X-ray inspection provide one more safety net. They catch metal fragments that break off from machine wear, plus dense foreign objects that cameras miss inside opaque capsules or coated tablets.

    Choosing the Right Dosage Form

    The capsule-versus-tablet decision turns on the drug’s chemistry, the patient population, the production budget, and what the market expects. There is no one right answer, only the right answer for each product.

    Formulation scientists run through a few questions before committing to a format:

    Does the drug taste bad? A capsule or coated tablet is mandatory. Uncoated bitter tablets drive patients away.

    Is the drug sensitive to air or moisture? Tablets with tablet coating are more stable than gelatin capsules, which soak up humidity and get sticky or brittle.

    Will the patients struggle with swallowing? Older adults and children often balk at large tablets. Gelatin capsules become slippery when wet and can be easier to get down. For the hardest cases, a liquid-filled softgel or an effervescent tablet that dissolves in water may be the only option.

    What is the volume and what is the budget? A startup making ten thousand units a month picks differently than a multinational producing millions. Capsules forgive small-scale production because semi-automatic equipment is cheap and flexible. Tablets demand more upfront money for tooling and process work but become far cheaper once volumes go up.

    Does the dose need adjusting? Tablets can be scored. Capsules cannot. If a drug protocol says “half a tablet for the first week, then a full tablet,” tablets win outright.

    FAQ

    What is the difference between hard and soft gelatin capsules? 

    Hard gelatin capsules are two-piece shells that hold dry material: powders, granules, or pellets. Soft gelatin capsules are one-piece sealed shells designed for liquids, oils, and semi-solids. Softgel shells contain plasticizers, which is why they stay flexible. Hard capsule shells are rigid and brittle when dry.

    Why are some pills coated and others not? 

    Coating hides bitter tastes, blocks moisture and light, controls drug release location, and gives the product a branded look. Uncoated tablets skip the coating step to save cost and time. This works fine for drugs that taste neutral and are chemically stable on their own.

    Can all medications be made as either capsules or tablets? 

    No. Liquid and oil-based drugs cannot be compressed and need softgels or liquid-filled firm capsules. Acid-sensitive drugs usually need enteric coating, which is easier to apply to tablets. Drugs that need large doses may require tablets because capsules max out at around 1.37 ml of fill. Formulation scientists look at the drug’s properties and pick the format that protects it, releases it at the right rate, and works for the intended patients. 

    Share This Article:
    Picture of Liangshu He Owner, SED PHARMA

    Liangshu He Owner, SED PHARMA

    Liangshu He is the owner of SED PHARMA, a supplier of pharmaceutical processing and packaging equipment serving international markets. Drawing on her experience in the pharmaceutical machinery industry, she shares practical perspectives on equipment selection, production line planning, and the connections between processing and packaging. Her articles focus on helping pharmaceutical and nutraceutical manufacturers understand equipment capabilities, evaluate production requirements, and ask the right questions before investing in machinery—from individual machines to integrated production lines.

    Table of Contents

    Blog Categories

    Popular Products

      Request A Free Quote

      *We respect your confidentiality, and all information is protected.







      Search
      Generic filters